Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
- 5. Power supply system and release
   5.1. Specifications
   5.2. Butterfly valve
   5.3. Inlet collector
   5.4. Adjustment of a cable of an accelerator
   5.5. Pressurization system with changeable length of an inlet path – VICS (FE DOHC)
   5.6. Valve of a control system of frequency of rotation of idling
   5.7. Elements of system of production of the fulfilled gases
   5.8. Monitoring systems and decrease in toxicity of the fulfilled gases
   5.9. Design description
   5.10. Preliminary checks of the engine
   5.11. Self-diagnostics function
   5.12. Codes of malfunctions
   5.13. System of decrease in toxicity of the fulfilled gases
   5.14. System of ventilation of a case (PCV)
   5.15. Check of the valve of system of ventilation of a case (PCV)
   5.16. Catching system паров fuels
   5.17. Check of system of catching паров fuels
   5.18. Check of the valve of system of catching паров fuels
   5.19. Filter check with absorbent carbon
   5.20. Check of the bilateral valve
   5.21. Separator check паров fuels
   5.22. Valve check паров fuels
   5.23. System of a retsirkulyatsiya of the fulfilled gases (EGR)
   5.24. Check of system of a retsirkulyatsiya of the fulfilled gases
   5.25. Check of the electromagnetic valve (EGR)
   5.26. Control valve (EGR)
   5.27. Pressurization system with changeable length of an inlet path (FE-DOHC engine)
   5.28. Vacuum chamber
   5.29. Unilateral locking valve
   5.30. Measuring instrument of a consumption of air
   5.31. The sensor of temperature of cooling liquid
   5.32. Sensor of provision of a butterfly valve
   5.33. Main relay
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





5.11. Self-diagnostics function

GENERAL INFORMATION

Arrangement of contacts of the diagnostic socket

And – contact of the fuel pump;
In – contact In + (IG 1);
D–fan contact;
About – contact of frequency of rotation of a cranked shaft of the engine (IGE);
R – contact of the display of codes of malfunctions;
Q–contact of testing of the engine;
R–"weight" contact;
S–"weight" contact;
T – contact of control of the engine.

At emergence of malfunctions in the main input and target devices by means of the special device for maintenance of the KJ-1 car find out the reason. The control unit the engine (RSM) registers malfunctions of separate input and target devices and displays them in the form of code numbers of malfunction.

Reading of codes of malfunctions

PERFORMANCE ORDER
1. Connect KJ–1 c the diagnostic socket.
2. Include ignition.
3. Choose a mode "1. TROUBLE CODE TEST"
4. Find out a cause of defect on a code of malfunction of DTC, having pressed the MANT key. Eliminate malfunction.

Prevention

After elimination of malfunctions remove codes of malfunctions from memory of the control unit.