Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
- 14. Wheels and tires
   14.1. Specifications
   14.2. General recommendations
   14.3. Recommendations about replacement of tires
   14.4. Check of pressure of air and condition of tires
   14.5. Palpation of wheels
   14.6. Types and causes of wear of a protector of the tire
   14.7. Removal and installation of wheels
   14.8. Shift of wheels
   14.9. Balancing of wheels
   14.10. Search and elimination of malfunctions
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits

14.3. Recommendations about replacement of tires


Pay attention to the following recommendations about removal and installation of tires on rims.

1. Be careful, that at installation not to damage an internal lateral surface of a rim of a wheel or external edge of an internal lateral surface of a seat of the tire.
2. A wire brush or an emery paper clear all rust and/or dirt from an internal lateral surface of a rim of a wheel.
3. Cleaning of aluminum rims carry out with use of only a soft fabric.
4. Remove from a tire protector everything extraneous subjects, such as pebble, glass splinters, nails etc.
5. Check correctness of installation of the gate.
6. For check of tightness use soap solution.
7. If tire replacement on an aluminum rim with use of steel tools, for an exception of damage of a disk is carried out, between a disk and the tool lay a rubber protective insert. Work carry out on a rubber mat, instead of on a firm surface.
8. Installation and repair of tires demands the special tool and professional skills. Professionals should carry out these works only.