Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
- 2. FE DOHC engines and Т8 DOHC
   2.1. Specifications
   2.2. Engine description
   2.3. A filtering element of the air filter
   2.4. Spark plugs
   2.5. Oil in an engine case
   2.6. Level of cooling liquid
   2.7. Driving belt
   2.8. High-voltage wires
   2.9. Hydraulic jacks of a gap of valves
   2.10. Check of a corner of an advancing of ignition
   2.11. Compression
   2.12. Removal and engine installation
   2.13. Removal and installation from the engine of auxiliary elements
   2.14. Removal and installation of a gear belt and pulleys
   2.15. Head of cylinders
   2.16. Block of cylinders
   2.17. Search and elimination of malfunctions
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits




Все про автомобили: https://myavto24.ru


2. FE DOHC engines and Т8 DOHC

2.1. Specifications

GENERAL INFORMATION

Characteristic
Engine model
FE DOHC
Т8 DOHC
Engine type
Petrol, four-cycle
Order of an arrangement of cylinders
Ryadny, four-cylinder
Form of the chamber of combustion
The multispherical
Arrangement and drive of valves
Top, belt drive
Working volume, cm3
1998
1793
Diameter of the cylinder and piston stroke, mm
86,0 x 86,0
81,0x87,0
Extent of compression
9,2:1
9,5:1
Pressure of compression, kPa
1176
1333
Gazoraspredeleniye phases Inlet valve Opening to VMT
10 °
6 °
Closing after NMT
55 °
46 °
Final valve Opening to NMT
55 °
50 °
Closing after VMT
10 °
10 °
Gap in valves, mm The inlet
0 it (is not regulated)
The final
0 it (is not regulated)
Frequency of rotation of a cranked shaft idling, mines-1
800±50
Corner of an advancing of ignition, to VMT
10±1 °
10±3 °
Operating procedure of cylinders
1–3–4–2