Kia Clarus/Credos

1995-2001 of release

Repair and car operation


KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
- 3. Greasing system
   3.1. Specifications
   3.2. Check of level of engine oil
   3.3. Check of pressure of engine oil
   3.4. Replacement of engine oil
   3.5. Replacement of the oil filter
   3.6. Oil radiator
   3.7. Oil pallet
   3.8. Oil pump
   3.9. Search and elimination of malfunctions
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





3.5. Replacement of the oil filter
PERFORMANCE ORDER
1. A special key turn out the oil filter. If the rubber sealing ring of the oil filter remained on the block of cylinders, remove it.
2. Wipe an interfaced surface of the engine pure rags.
3. Grease with a thin layer of pure engine oil a rubber sealing ring of the new oil filter.
Prevention

Be careful: engine and filter the very hot.
4. Screw the oil filter before contact of a sealing ring of the oil filter with the block of cylinders and tighten the filter on 11/6 turns.
5. Start up the engine and check absence of leakages of oil round filter consolidation.
6. Switch off the engine and wait for 5 mines for oil running off in the pallet. Check level of engine oil and, if necessary, finish it to norm.

Capacity of the oil filter: 0,20 l