Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
- 3. Greasing system
   3.1. Specifications
   3.2. Check of level of engine oil
   3.3. Check of pressure of engine oil
   3.4. Replacement of engine oil
   3.5. Replacement of the oil filter
   3.6. Oil radiator
   3.7. Oil pallet
   3.8. Oil pump
   3.9. Search and elimination of malfunctions
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits






3.7. Oil pallet

GENERAL INFORMATION

1–reception exhaust pipe and arm;
2–angular plate;
3–bottom cover of a case couplings (FE engine);
4–oil pallet;
5–maslopriyemnik;
6–rigidity element.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge oil from the engine.
3. Turn out bolts and remove the bottom and lateral covers.
4. Turn out bolts and remove a reception exhaust pipe and an arm.
5. Turn out bolts and remove an angular plate.
6. Turn out bolts and remove the bottom cover of a case couplings (FE engine).
7. Turn out bolts of fastening of the oil pallet. An edge of the flat screw-driver inserted between the oil pallet and an element of rigidity of the block of cylinders, separate the oil pallet from the block of cylinders.

Prevention

Do not insert a screw-driver between the block of cylinders and the oil pallet as it can damage interfaced surfaces.

Separating the oil pallet by means of the lever, do not bend it.

Clearing the pallet of hermetic, do not damage and do not scratch a privalochny surface.


8. Remove the oil pallet.

Prevention

If the oil pallet is reused, remove everything extraneous materials from interfaced surfaces of the oil pallet and the block of cylinders.


9. Unscrew bolts and remove a maslopriyemnik.
10. Unscrew bolts and remove a rigidity element.
11. Installation of the oil pallet is carried out to sequences, return to removal.