Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
- 7. Ignition system
   7.1. Specifications
   7.2. Iskroobrazovaniye check
   7.3. Spark plugs
   7.4. Check of spark plugs
   7.5. High-voltage wires
   7.6. Ignition coil
   7.7. Ignition distributor
   7.8. Search and elimination of malfunctions
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits






7.7. Ignition distributor

GENERAL INFORMATION

Elements of fastening of the distributor of ignition on the FE DOHC engine

1–high-voltage wires;
2–electric socket of the distributor of ignition;
3–bolt;
4–ignition distributor.

Removal and installation

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Disconnect the electric socket from the ignition distributor.
3. Disconnect high-voltage wires from the ignition distributor.
4. Turn out bolts of fastening of the distributor of ignition.
5. Installation is carried out to sequences, return to removal.
6. If necessary establish a new sealing ring of the distributor of ignition.
7. Grease a new sealing ring with engine oil.
8. At installation combine blades of the distributor of ignition and camshaft grooves.