Kia Clarus/Credos

1995-2001 of release

Repair and car operation


KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
- 8. Coupling
   8.1. Specifications
   8.2. Check of level of liquid
   8.3. Adjustment of a pedal of coupling
   8.4. Coupling pedal
   8.5. Pumping of hydraulic system of a drive of coupling
   8.6. Main cylinder of coupling
   8.7. Repair of the main cylinder of coupling
   8.8. Working cylinder of coupling
   8.9. Repair of the working cylinder of coupling
   8.10. Coupling disk
   8.11. Search and elimination of malfunctions
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





8.5. Pumping of hydraulic system of a drive of coupling
GENERAL INFORMATION
Prevention

Any hydraulic system works normally if air is removed from it.

Liquid in a popolnitelny tank of brake system should be supported at level 3/4 or is higher in the course of pumping.

During removal of air add only pure liquid recommended by the manufacturer.

The liquid used in a hydraulic drive, dissolves paint and plastic therefore at liquid hit on a paint and varnish covering of the car wash out it a large amount of water.

PERFORMANCE ORDER
1. Lift the car and fix on support. Unscrew a cover from the pumping union on the working cylinder of coupling and attach to it a vinyl hose.
2. Arrange other end of a vinyl hose in glass capacity of sufficient volume.
3. Slowly press a coupling pedal several times.
4. At the pressed pedal of coupling by the special tool weaken the union of pumping and let the air out from hydraulic system.
5. Tighten the union of pumping and release a coupling pedal. Repeat operations 3 and 4 until there will be a brake liquid without air vials.

Inhaling moment: 5,88–8.82 N • m
6. Check correctness of work of coupling.