Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
- 8. Coupling
   8.1. Specifications
   8.2. Check of level of liquid
   8.3. Adjustment of a pedal of coupling
   8.4. Coupling pedal
   8.5. Pumping of hydraulic system of a drive of coupling
   8.6. Main cylinder of coupling
   8.7. Repair of the main cylinder of coupling
   8.8. Working cylinder of coupling
   8.9. Repair of the working cylinder of coupling
   8.10. Coupling disk
   8.11. Search and elimination of malfunctions
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits




8.6. Main cylinder of coupling

GENERAL INFORMATION

1–coupling pipeline;
2–nut;
3–a hose from a tank;
4–laying.

Removal and installation


PERFORMANCE ORDER
1. The special tool disconnect a coupling branch pipe.
2. Turn out nuts of fastening of the main cylinder of coupling.
3. Remove the main cylinder of coupling.

Prevention

As the liquid used in a hydraulic drive, dissolves paint, substitute for collecting liquid the suitable container.


4. Installation is carried out to sequences, return to removal.
5. Remove air from a hydraulic contour of coupling.
6. Check absence of leakages of brake liquid from a hydraulic contour of coupling.
7. Carry out road tests of the car.