Kia Clarus/Credos

1995-2001 of release

Repair and car operation


KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
- 18. Electric equipment
   18.1. Specifications
   18.2. Devices for check of elements of the electric equipment and electric chains
   18.3. Electric sockets
   18.4. Wires
   18.5. Fuse replacement
   18.6. Main and fuses
   18.7. Box of the main safety locks
   18.8. Fuse
   18.9. Storage battery
   18.10. Generator
   18.11. Check of a sound signal
   18.12. Check of a heater of back glass
   18.13. Switch of a heater of back glass
   18.14. Relay of a heater of back glass
   18.15. Combination of devices
   18.16. Safety cushion (SRS)
   18.17. System of blocking of the car
+ 19. Brake system
+ 20. Electric circuits





18.13. Switch of a heater of back glass

 Removal and installation
PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove a dashboard casing.
3. Disconnect the socket from the switch on the dashboard.
4. Remove the switch from the dashboard.
5. Installation is carried out to sequences, return to removal.

Check

PERFORMANCE ORDER
1. An ohmmeter check conductivity between switch conclusions.
2. At not pressed button of the switch of conductivity between contacts and and b should not be, and at pressed - conductivity should be (resistance of 0 Ohm).
3. In the switch the lamp of illumination in capacity of 1,4 W is established.