KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
- 18. Electric equipment
18.1. Specifications
18.2. Devices for check of elements of the electric equipment and electric chains
18.3. Electric sockets
18.4. Wires
18.5. Fuse replacement
18.6. Main and fuses
18.7. Box of the main safety locks
18.8. Fuse
18.9. Storage battery
18.10. Generator
18.11. Check of a sound signal
18.12. Check of a heater of back glass
18.13. Switch of a heater of back glass
18.14. Relay of a heater of back glass
18.15. Combination of devices
18.16. Safety cushion (SRS)
18.17. System of blocking of the car
+ 19. Brake system
+ 20. Electric circuits
|
For shutdown of the socket press a clamp. At shutdown of the socket do not pull for wires, and hold the socket case.
Check
If in the course of conductivity or tension check by means of the test device щуп to enter into a rozetochny part of the socket, separation of the socket and contact deterioration is thus possible. Therefore щуп it is necessary to connect from conducting.
Replacement
For dismantling of the socket use the corresponding tool. At installation press before click.
Insert a stripper or a metal subject from conclusions of the socket and extend contact back by simultaneous pressing clamps.
|
|
Socket of nested type No. 1 |
|
|