Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
- 2. FE DOHC engines and Т8 DOHC
   2.1. Specifications
   2.2. Engine description
   2.3. A filtering element of the air filter
   2.4. Spark plugs
   2.5. Oil in an engine case
   2.6. Level of cooling liquid
   2.7. Driving belt
   2.8. High-voltage wires
   2.9. Hydraulic jacks of a gap of valves
   2.10. Check of a corner of an advancing of ignition
   2.11. Compression
   2.12. Removal and engine installation
   2.13. Removal and installation from the engine of auxiliary elements
   2.14. Removal and installation of a gear belt and pulleys
   2.15. Head of cylinders
   2.16. Block of cylinders
   2.17. Search and elimination of malfunctions
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





2.10. Check of a corner of an advancing of ignition

PERFORMANCE ORDER
1. Warm up the engine and let's to it work idling.
2. Establish the gear shifting lever in neutral situation.
3. Establish forward wheels in average situation.
4. Disconnect everything consumers of the electric power.
5. Attach the socket of a stroboscope and the special KJ-1 device.
6. Direct stroboscope light on a pulley of a cranked shaft and be convinced that a label for installation of a corner of an advancing of ignition on a pulley of a cranked shaft (yellow) is combined with the corresponding label on a casing of a gear belt.

Corner of an advancing of ignition:
FE DOHC: 10±1 ° to VMT
Т8 DOHC: 10±3 ° to VMT

Prevention

There is no need to change installation of a corner of an advancing of ignition.


7. Measure frequency of rotation of a cranked shaft of the engine idling.

Frequency of rotation of a cranked shaft of the engine idling:
FE DOHC 800±50 of mines-1
Т8 DOHC 800±50 of mines-1

Prevention

Frequency of rotation of a cranked shaft of the engine is idling supported automatically by the control unit the engine (RSM) by means of the electromagnetic valve of idling (IAC) and in adjustment of frequency of rotation idling there is no need.