Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
- 2. FE DOHC engines and Т8 DOHC
   2.1. Specifications
   2.2. Engine description
   2.3. A filtering element of the air filter
   2.4. Spark plugs
   2.5. Oil in an engine case
   2.6. Level of cooling liquid
   2.7. Driving belt
   2.8. High-voltage wires
   2.9. Hydraulic jacks of a gap of valves
   2.10. Check of a corner of an advancing of ignition
   2.11. Compression
   2.12. Removal and engine installation
   2.13. Removal and installation from the engine of auxiliary elements
   2.14. Removal and installation of a gear belt and pulleys
   2.15. Head of cylinders
   2.16. Block of cylinders
   2.17. Search and elimination of malfunctions
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





2.9. Hydraulic jacks of a gap of valves

GENERAL INFORMATION

Prevention

At long operation of the engine noise in the gas-distributing mechanism can be idling audible. This noise should disappear after the engine will get warm to normal working temperature.


PERFORMANCE ORDER
1. Check, whether there is no noise in the gas-distributing mechanism. In the presence of noise check.

– quality and oil level in the engine;
– pressure of oil in the engine.
2. If noise did not stop, in the course of dismantling check, whether each hydraulic jack is compressed by pressing it.
3. If the hydraulic jack is compressed, replace it.