Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
- 5. Power supply system and release
   5.1. Specifications
   5.2. Butterfly valve
   5.3. Inlet collector
   5.4. Adjustment of a cable of an accelerator
   5.5. Pressurization system with changeable length of an inlet path – VICS (FE DOHC)
   5.6. Valve of a control system of frequency of rotation of idling
   5.7. Elements of system of production of the fulfilled gases
   5.8. Monitoring systems and decrease in toxicity of the fulfilled gases
   5.9. Design description
   5.10. Preliminary checks of the engine
   5.11. Self-diagnostics function
   5.12. Codes of malfunctions
   5.13. System of decrease in toxicity of the fulfilled gases
   5.14. System of ventilation of a case (PCV)
   5.15. Check of the valve of system of ventilation of a case (PCV)
   5.16. Catching system паров fuels
   5.17. Check of system of catching паров fuels
   5.18. Check of the valve of system of catching паров fuels
   5.19. Filter check with absorbent carbon
   5.20. Check of the bilateral valve
   5.21. Separator check паров fuels
   5.22. Valve check паров fuels
   5.23. System of a retsirkulyatsiya of the fulfilled gases (EGR)
   5.24. Check of system of a retsirkulyatsiya of the fulfilled gases
   5.25. Check of the electromagnetic valve (EGR)
   5.26. Control valve (EGR)
   5.27. Pressurization system with changeable length of an inlet path (FE-DOHC engine)
   5.28. Vacuum chamber
   5.29. Unilateral locking valve
   5.30. Measuring instrument of a consumption of air
   5.31. The sensor of temperature of cooling liquid
   5.32. Sensor of provision of a butterfly valve
   5.33. Main relay
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





5.24. Check of system of a retsirkulyatsiya of the fulfilled gases

PERFORMANCE ORDER
1. Connect special devices for car maintenance to RSM, as is shown in drawing.
2. Start up the engine.
3. Increase frequency of rotation of a cranked shaft of the engine and while the engine did not get warm, check existence of positive tension of the storage battery (In +) on a conclusion of 23 RSM.
4. Warm up the engine to normal working temperature and establish an idling mode.
5. Increase frequency of rotation of a cranked shaft of the engine and be convinced that the device shows tension of 1,5-12 Century.
6. Earth a wire crossing point a conclusion of 23 RSM.
7. Check, whether the engine normally works at increase in frequency of rotation of a cranked shaft or глохнет idling.