The sensor of temperature of cooling liquid is located near the thermostat.
PERFORMANCE ORDER
1. Disconnect the socket from the sensor of temperature of cooling liquid.
2. Turn out the sensor of temperature of cooling liquid.
Check
PERFORMANCE ORDER
1. Place the sensor in a vessel with water together with the thermometer, and gradually heating up water, measure resistance of the sensor at various temperatures.
Temperature
Resistance of the sensor, kiloohm
– 20°С
16,2±1,6
20°С
2,45±0,24
80°С
0,322±0,032
2. If resistance of the sensor differs from demanded values, replace it.
Installation
PERFORMANCE ORDER
1. Establish the sensor of temperature of cooling liquid with new laying. Inhaling moment: 25–29 N • m
2. Connect to the sensor the socket.
3. Start up the engine and check absence of leaks from cooling system.