Духи с феромонами по материалам http://www.eromagnat.ru.
-

Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
- 13. Steering
   13.1. Specifications
   13.2. Check of a free wheeling of a steering wheel
   13.3. Check of effort of turn of a steering wheel
   13.4. Belt of a drive of the pump of the amplifier of a steering
   13.5. Check of pressure of liquid in hydraulic system
   13.6. Replacement of a protective cover of steering draft
   13.7. Steering shaft
   13.8. Steering transfer
   13.9. Pump of the amplifier of a steering (FE DOHC)
   13.10. Dismantling and assembly of the pump of the amplifier of a steering (FE DOHC)
   13.11. Search and elimination of malfunctions
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





13.9. Pump of the amplifier of a steering (FE DOHC)

GENERAL INFORMATION

The pump of the amplifier of the steering, established with the FE DOHC engine


1–nut;
2–pulley of the oil pump;
3–pressure head hoses;
4–oil pump;
5–arm of the oil pump.

The pump of the amplifier of the steering, established with the DOHC T8 engine

1–driving belt;
2–pressure head hoses;
3–soaking-up (inlet) hoses;
4–knot of the oil pump;
5–arm of the oil pump.

PERFORMANCE ORDER
1. Removal of the pump carry out in the sequence shown in drawing.

Prevention

After a detachment of pressure head pipelines and returnable hoses, probably, liquid of the amplifier of a steering therefore prepare suitable capacity will start to follow.


2. Check a condition of all details and, if necessary, repair or replace them.
3. Installation carry out to sequences, return shown in drawing, taking into account the following.

1) Establish hoses so that they were not overwound and did not make contact with any other parts.
2) Adjust a belt tension.
3) Fill in liquid in a tank of the amplifier of a steering and remove air from system.
4) Check on absence of leakages of liquid from the oil pump and hoses.