Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
- 17. Central air
   17.1. Specifications
   17.2. Check of drives of central air
   17.3. Connection of pipelines
   17.4. Quick disconnect connecting couplings
   17.5. Check of elements of central air located in salon of the car
   17.6. Removal and compressor installation
   17.7. Drive of management of modes
   17.8. Mixing drive
   17.9. Air inlet drive
   17.10. Channel sensor
   17.11. Compressor
   17.12. Magnetic coupling
   17.13. Two-regime relay of pressure
   17.14. Coolant (R–134A)
   17.15. Main data on service of system of cooling
   17.16. Search and elimination of malfunctions
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits

17.4. Quick disconnect connecting couplings

Separation of the connecting coupling

1. Put to the connecting coupling the tool so that it entered into a case opening for the purpose of release of a spring ring.
2. Enter the tool into a case opening for liberation of a covering detail from a spring ring.
3. Move apart covering and covered parts for their office from each other.
4. Remove the tool from the disunited connecting coupling with spring fixing.

Connection of the connecting coupling

1. Check the coupling on existence of a spring ring and extent of its damage and remove the damaged ring by means of a hook from a wire. In case of absence or damage of a ring establish a new ring.
2. Clear parts of the coupling.
3. Establish a new sealing ring.
4. Apply only the specified rings. Oil the pure cooling.
5. Gather parts, moving them each other an easy rotary motion.
6. To be convinced of coupling connection, visually check, that the spring ring was over the razvaltsovanny end of a covering part.