The device, service and Kia Clarus/Credos repair - 6.10. Check of the maximum pressure created by the pump//KIA Klarus / Kredos of 1995-2001 - doska-parketnaja.ru

Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
- 6. Fuel system
   6.1. Specifications
   6.2. Pressure removal in fuel system
   6.3. Filling with fuel of fuel system
   6.4. Check of residual pressure in fuel system
   6.5. Check of fuel pipelines
   6.6. Fuel tank
   6.7. Fuel filter
   6.8. Fuel pump
   6.9. Check of the relay of the fuel pump
   6.10. Check of the maximum pressure created насосом.63
   6.11. Check of absence of break of an electric chain
   6.12. Pressure regulator
   6.13. Fuel nozzles
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





6.10. Check of the maximum pressure created by the pump

GENERAL INFORMATION

Prevention

The fuel system remains under pressure even after engine switching off therefore before a detachment of pipelines it is necessary to remove pressure in fuel system.


PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Connect the measuring device between the fuel filter and the main fuel hose.
3. Connect a wire to the negative plug of the storage battery.
4. An additional wire connect F/P plugs (the fuel pump) and In + the diagnostic socket.
5. Include ignition no more than on 10 with therefore the fuel pump will start to work and will create demanded pressure in fuel system.
6. Measure the maximum pressure created by the pump.

The maximum pressure created by the fuel pump: 441–588 kPas
7. Switch off ignition and remove the additional wire connecting plugs of the diagnostic socket.
8. If pressure does not correspond demanded, replace the fuel pump.