Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
- 6. Fuel system
   6.1. Specifications
   6.2. Pressure removal in fuel system
   6.3. Filling with fuel of fuel system
   6.4. Check of residual pressure in fuel system
   6.5. Check of fuel pipelines
   6.6. Fuel tank
   6.7. Fuel filter
   6.8. Fuel pump
   6.9. Check of the relay of the fuel pump
   6.10. Check of the maximum pressure created насосом.63
   6.11. Check of absence of break of an electric chain
   6.12. Pressure regulator
   6.13. Fuel nozzles
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits

6.8. Fuel pump

GENERAL INFORMATION

1–electric socket;
2–fuel hose;
3–fuel pump and filter (contour of low pressure);

4–rubber consolidation.

Removal and installation

Prevention

Before a detachment of pipelines remove pressure in fuel system.

PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery.

2. Remove a pillow of a back seat.

3. Disconnect sockets from the block of supply of fuel.

4. Turn out three screws of fastening of a cover.

5. Disconnect two fuel hoses from the block of supply of fuel.

6. Get the fuel pump from a fuel tank.

7. Installation is carried out to sequences, return to removal.