Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
- 6. Fuel system
   6.1. Specifications
   6.2. Pressure removal in fuel system
   6.3. Filling with fuel of fuel system
   6.4. Check of residual pressure in fuel system
   6.5. Check of fuel pipelines
   6.6. Fuel tank
   6.7. Fuel filter
   6.8. Fuel pump
   6.9. Check of the relay of the fuel pump
   6.10. Check of the maximum pressure created насосом.63
   6.11. Check of absence of break of an electric chain
   6.12. Pressure regulator
   6.13. Fuel nozzles
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits






6.3. Filling with fuel of fuel system

GENERAL INFORMATION

After pressure removal in fuel system the fuel system should be made active to avoid a long provorachivaniye by a starter at engine start.

PERFORMANCE ORDER
1. An additional wire connect F/P plugs (the fuel pump) and In + the diagnostic socket.
2. Include ignition no more than on 10 with therefore the fuel pump will start to work and will create demanded pressure in fuel system. If ignition to leave included more than on 10 with, the additional wire will strongly heat up. Check absence of leakages of fuel from fuel system.
3. Switch off ignition and remove additional a wire connecting plugs of the diagnostic socket.