Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
- 6. Fuel system
   6.1. Specifications
   6.2. Pressure removal in fuel system
   6.3. Filling with fuel of fuel system
   6.4. Check of residual pressure in fuel system
   6.5. Check of fuel pipelines
   6.6. Fuel tank
   6.7. Fuel filter
   6.8. Fuel pump
   6.9. Check of the relay of the fuel pump
   6.10. Check of the maximum pressure created насосом.63
   6.11. Check of absence of break of an electric chain
   6.12. Pressure regulator
   6.13. Fuel nozzles
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits





6.2. Pressure removal in fuel system

GENERAL INFORMATION

The fuel system remains under pressure even after engine switching off therefore before a detachment of pipelines it is necessary to remove pressure in fuel system.

PERFORMANCE ORDER
1. Start up the engine.
2. Disconnect the socket from the fuel pump.
3. Leave the engine to work till a stop connected with lack of fuel in the distributive fuel highway. As a result of the executed actions pressure in fuel system is removed.
4. Connect the socket of a food of the fuel pump.

Use rags to prevent emission of a stream of fuel at separation of fuel hoses. After a detachment from the engine muffle hoses suitable jams.

At check of fuel system use the special device.

Prevention

For an attachment of the special device to the fuel filter and the main hose for an exception of a podtekaniye of fuel use tightening collars.