Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
- 15. Suspension bracket
   15.1. Specifications
   15.2. Adjustment of corners of installation of forward wheels
   15.3. Adjustment of corners of installation of back wheels
   15.4. A forward amortization rack with a spring
   15.5. Repair of an amortization rack of a forward suspension bracket
   15.6. Bottom lever of a forward suspension bracket
   15.7. Forward stabilizer of cross-section stability
   15.8. Draft of the forward stabilizer of cross-section stability
   15.9. Traverse
   15.10. Back amortization rack
   15.11. Repair of a back amortization rack
   15.12. Back stabilizer of cross-section stability
   15.13. Draft of the back stabilizer of cross-section stability
   15.14. Cross-section and longitudinal drafts
   15.15. Back cross-piece
   15.16. Search and elimination of malfunctions
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits






15.13. Draft of the back stabilizer of cross-section stability

GENERAL INFORMATION

1–nut;
2–adjusting washer;
3–safety plug;
4–draft of the stabilizer.

Removal and installation

PERFORMANCE ORDER
1. Lift a jack a back part of the car and establish it on reliable support.
2. Remove wheels.
3. Removal carry out in the sequence shown in drawing.
4. Check a condition of all details and, if necessary, repair or replace them.
5. Installation is carried out to sequences, return to removal, taking into account the following.
6. Establish wheels.

Inhaling moment: 88–118 N • m