Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
- 16. Body
   16.1. Cowl
   16.2. Trunk lid
   16.3. Front bumper
   16.4. Rear bumper
   16.5. Forward door
   16.6. Back door
   16.7. Screen wiper and stekloomyvatel of a windscreen
   16.8. Tank of a stekloomyvatel
   16.9. Windscreen
   16.10. Back glass
   16.11. Dashboard
   16.12. Sitting lobbies
   16.13. Back sitting
   16.14. Mechanism of an inclination of a back
   16.15. Seat belts
   16.16. External rear-view mirror
   16.17. An external rear-view mirror with the electric drive
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits

16.12. Sitting lobbies


1–forward sitting;
2–pillow of back sitting;
3–back of back sitting;
4–adjusting arm of a pillow of back sitting;
5–electric motor of longitudinal moving of sitting;
6–forward elevating electric motor;
7–back elevating electric motor;
8–electric motor of change of a tilt angle of a back;
9–electric switches of sitting.


1. Move forward sitting back against the stop.
2. Turn out two bolts of forward fastening of a sled of sitting.
3. Move forward sitting forward against the stop.
4. Remove covers closing nuts of fastening of a back part of a sled of forward sitting, and unscrew nuts (are shown by shooters).
5. Remove forward sitting.


1. Check, that the lever of adjustment of a seat and the lever of the mechanism of an inclination of a back moved easily.
2. Check reliability of an inhaling of bolts of fastening of a seat. If necessary tighten bolts the demanded moment.

Inhaling moment: 38–51 N • m

3. Put konsistentny greasing on moving details.

4. Check wear of the lever of adjustment of sitting.


Installation is carried out to sequences, return to removal.

Inhaling moment:
Bolts of fastening of the mechanism of an inclination of a back: 34–56 N • m
Nut of fastening of the lever of lifting of a back: 17–25 N • m