Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
- 16. Body
   16.1. Cowl
   16.2. Trunk lid
   16.3. Front bumper
   16.4. Rear bumper
   16.5. Forward door
   16.6. Back door
   16.7. Screen wiper and stekloomyvatel of a windscreen
   16.8. Tank of a stekloomyvatel
   16.9. Windscreen
   16.10. Back glass
   16.11. Dashboard
   16.12. Sitting lobbies
   16.13. Back sitting
   16.14. Mechanism of an inclination of a back
   16.15. Seat belts
   16.16. External rear-view mirror
   16.17. An external rear-view mirror with the electric drive
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits






16.5. Forward door

GENERAL INFORMATION

1–cover of the internal handle;
2–door upholstery;
3–internal handle;
4–door filter;
5–directing glasses "V";
6–glass;
7–window regulator;
8–door lock;
9–external handle;
10-loudspeaker;
11-a directing groove of glass;
12-door fringing;
13-door furnish;
14-directing glasses "A";
15-framework of a forward door;
16-limiter of opening of a door;
17-door loop;
18-door consolidation.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove the internal handle, an armrest, the handle of a window regulator and door facing.

Prevention

For cars with electric window regulators and locks of a door disconnect the socket of a plait of wires.


3. Remove a door upholstery.

Prevention

Upholstery of a door remove carefully that it could be used repeatedly.


4. Remove the door filter.

Prevention

Remove the door filter carefully that it could be used repeatedly.

If necessary grease the limiter of opening of a door.


5. Move a bolt of fastening of glass of a door that he could be taken from a working opening.
6. Turn out a bolt of fastening of a door directing glass, and then remove directing door glasses.
7. Turn out a bolt of fastening of glass of a door.
8. Remove door glass, having lifted it up.

Prevention

Carefully remove glass not to damage it.


9. Remove a fillet and a sealant.

Prevention

The fillet and sealant represent one detail.


10. Turn out bolts of fastening of a window regulator, and then get a window regulator through a working opening.
11. Remove a window regulator, draft and adjusting nuts of fastening of the external handle.
12. Remove the external handle.
13. Remove the holder of the cylinder of the lock, and then remove a drive of the lock of a door.
14. Turn out screws and remove the door lock assembled.
15. Remove a pin of the limiter of opening of a door.
16. Turn out bolts of fastening of a loop of a door and remove a door.

Installation

PERFORMANCE ORDER
Installation of a door carry out to sequences, return to removal, taking into account the following.

Prevention

Before installation of glass of a door check, that consolidation of glass of a door was not damaged. After installation of a window regulator adjust it so that door glass easily and smoothly moved up and down.

If necessary grease the limiter of opening of a door.

Moments of an inhaling, N • m
Door lock assembled: 4,2–6,18
External handle: 8,8–13
Directing glasses: 7,8–11
Nut of fastening of a window regulator: 8,8–13
Bolt of fastening of a window regulator: 7,8–11
Doggie of the lock of a door: 18–26
Bolt of fastening of a loop of a door: 18–29



Adjustment

PERFORMANCE ORDER
1. Check, that the door was easily closed and was not люфта. In case of need weaken screws of a doggie of fastening and adjust the provision of a door, moving a doggie of the lock of a door on a vertical or across.
2. Check a back gap between a door and a body. In case of need adjust a door, moving a doggie of the lock of a door across.

Inhaling moment: 18–27 N • m


Door loops

PERFORMANCE ORDER
1. Open a door and if in loops is available люфт, tighten bolts of fastening of a loop of a door (are shown by shooters).
2. To adjust a gap between a door and a body, weaken bolts of fastening of a loop of a door and carry out adjustment.

Inhaling moment: 17,64–29,4 N • m