Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
- 16. Body
   16.1. Cowl
   16.2. Trunk lid
   16.3. Front bumper
   16.4. Rear bumper
   16.5. Forward door
   16.6. Back door
   16.7. Screen wiper and stekloomyvatel of a windscreen
   16.8. Tank of a stekloomyvatel
   16.9. Windscreen
   16.10. Back glass
   16.11. Dashboard
   16.12. Sitting lobbies
   16.13. Back sitting
   16.14. Mechanism of an inclination of a back
   16.15. Seat belts
   16.16. External rear-view mirror
   16.17. An external rear-view mirror with the electric drive
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits

16.15. Seat belts


1–knot of a forward seat belt;
2–forward locks;
4–back locks;
5–anchor bolt;
6–cover of an anchor bolt;
7–natyazhitel of a seat belt;
8–height regulator.


1. Disconnect a wire from the negative plug of the storage battery.
2. Removal carry out in the sequence shown in drawing.
3. Installation carry out to sequences, return to removal.


1. Check a condition of clamps of fastening of seat belts.
2. Check a condition of anchor fastening of seat belts.
3. Remove the panel of the bottom upholstery of the central rack.
4. Check a condition of natyazhitel of seat belts.
5. Establish the panel of the bottom upholstery of the central rack.
6. Extend a seat belt for all length and check that he is nominated easily and smoothly.
7. Check fastenings of seat belts to uvulas of clamps.
8. Press the button of a clamp and be convinced that the seat belt uvula easily leaves a clamp, and the button comes back to a starting position. Do not assort natyazhitel of seat belts or clamps.