Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
- 19. Brake system
   19.1. Specifications
   19.2. Pumping of hydraulic system of a drive of brakes
   19.3. Check of brake tubes and hoses
   19.4. Replacement of brake hoses
   19.5. Height of installation of a pedal of a brake
   19.6. Free wheeling of a pedal of a brake
   19.7. Distance of a pedal of a brake from a floor
   19.8. Brake pedal
   19.9. Check of the switch of a stoplight
   19.10. Main brake cylinder
   19.11. Check of the vacuum amplifier of brakes
   19.12. Forward disk brake
   19.13. Back disk brake
   19.14. Pressure regulator
   19.15. Parking brake
   19.16. Anti-blocking system of brakes (ABS)
   19.17. List of codes of malfunctions of brake system
   19.18. Precautions at carrying out repair
   19.19. Pumping of hydraulic system of a drive of brakes
   19.20. Hydraulic control unit (HCV)
   19.21. ABS control unit
   19.22. Sensors of frequency of rotation of a wheel
   19.23. Rotor of the forward sensor
   19.24. Main survey
   19.25. Check of functionality
   19.26. Search and elimination of malfunctions
+ 20. Electric circuits

19.4. Replacement of brake hoses


1. A special key unscrew a connecting nut of a brake tube from a hose.
2. Release a clip and remove a brake hose from an arm.


1. Establish a brake hose in an arm and fix it a clip.
2. Connect a brake hose to a brake tube and a special key tighten a connecting nut.

Inhaling moment: 13–22 N • m


Be convinced of that the hose is not overwound.

Be convinced of that the hose does not concern other parts at fluctuations of a body of the car and turned to the full to the left or to the right wheels.

3. Several times press a pedal of a brake and check on absence of leaks from a brake hose and its connection with a brake tube.
4. Check level of brake liquid which should be between MAX and MIN labels located on wall of a transparent popolnitelny tank.
5. Remove air from hydraulic system of a drive of brakes.
6. Be convinced that liquid level is in a tank between labels the MOVE and MIN.
7. Add liquid if its level is below a label the MOVE.