Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
- 19. Brake system
   19.1. Specifications
   19.2. Pumping of hydraulic system of a drive of brakes
   19.3. Check of brake tubes and hoses
   19.4. Replacement of brake hoses
   19.5. Height of installation of a pedal of a brake
   19.6. Free wheeling of a pedal of a brake
   19.7. Distance of a pedal of a brake from a floor
   19.8. Brake pedal
   19.9. Check of the switch of a stoplight
   19.10. Main brake cylinder
   19.11. Check of the vacuum amplifier of brakes
   19.12. Forward disk brake
   19.13. Back disk brake
   19.14. Pressure regulator
   19.15. Parking brake
   19.16. Anti-blocking system of brakes (ABS)
   19.17. List of codes of malfunctions of brake system
   19.18. Precautions at carrying out repair
   19.19. Pumping of hydraulic system of a drive of brakes
   19.20. Hydraulic control unit (HCV)
   19.21. ABS control unit
   19.22. Sensors of frequency of rotation of a wheel
   19.23. Rotor of the forward sensor
   19.24. Main survey
   19.25. Check of functionality
   19.26. Search and elimination of malfunctions
+ 20. Electric circuits

19.17. List of codes of malfunctions of brake system

GENERAL INFORMATION

Malfunction code	Faulty element	Possible reason
1111	All sockets and conducting	Malfunction of the socket or conducting
1112	Inlet valve (FL)	Malfunction of the valve, conducting or ABS control unit
1132	Final valve (FL)
1114	Inlet valve (FR)
1134	Final valve (FR)
1211	Inlet valve (RR)
1213	Final valve (RR)
1212	Inlet valve (RL)
1214	Final valve (RL)
2234	Main relay and main fuse	Malfunction of the main relay, main safety lock or HCV conducting
1233	Sensor of speed of a wheel (FL)	Malfunction of conducting
1241	Sensor of speed of a wheel (FR)	Malfunction is shown from time to time because of short circuit in the coil of the sensor or conducting
1243	Sensor of speed of a wheel (RR)	Damage of a rotor of the sensor or gap between a rotor of the sensor and the sensor it is too great or too small
1311	Sensor of speed of a wheel (RL)	The noise caused by the wrong installation or loss of a wheel of the sensor or too big gap between a rotor of the sensor and the sensor
4133	The pump engine does not work	Mechanical or electric malfunction of knot of the electropump
1313	The insufficient pressure created by the pump	Low hydraulic pressure
1313	The insufficient pressure created by the pump	Low hydraulic pressure
–	The control lamp of ABS burns, but does not signal about codes of malfunctions	The electric chain or low level of brake liquid is faulty