Kia Clarus/Credos

1995-2001 of release

Repair and car operation


KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
- 19. Brake system
   19.1. Specifications
   19.2. Pumping of hydraulic system of a drive of brakes
   19.3. Check of brake tubes and hoses
   19.4. Replacement of brake hoses
   19.5. Height of installation of a pedal of a brake
   19.6. Free wheeling of a pedal of a brake
   19.7. Distance of a pedal of a brake from a floor
   19.8. Brake pedal
   19.9. Check of the switch of a stoplight
   19.10. Main brake cylinder
   19.11. Check of the vacuum amplifier of brakes
   19.12. Forward disk brake
   19.13. Back disk brake
   19.14. Pressure regulator
   19.15. Parking brake
   19.16. Anti-blocking system of brakes (ABS)
   19.17. List of codes of malfunctions of brake system
   19.18. Precautions at carrying out repair
   19.19. Pumping of hydraulic system of a drive of brakes
   19.20. Hydraulic control unit (HCV)
   19.21. ABS control unit
   19.22. Sensors of frequency of rotation of a wheel
   19.23. Rotor of the forward sensor
   19.24. Main survey
   19.25. Check of functionality
   19.26. Search and elimination of malfunctions
+ 20. Electric circuits





19.26. Search and elimination of malfunctions

GENERAL INFORMATION

MALFUNCTION
POSSIBLE REASON
ELIMINATION METHOD
Weak braking Leakage of brake liquid Repair
Air in system Remove air
The block or slip is worn-out Replace
Hardening of a slip or bad contact Clear or replace
Malfunction of the piston of the disk piston Pierce or replace
Malfunction of the main thing or wheel brake cylinder Repair or replace
Malfunction of the vacuum amplifier of a brake Repair or replace
Malfunction of a safety valve (vacuum tube) Replace
Damage of a vacuum tube Replace
Loss of properties of a vacuum tube Replace
Malfunction of the double distributive valve Replace
When braking the car withdraws in one party Worn-out block or slip Replace
On brake shoes greasing, oil or water got Clear or replace
Hardening of a slip or non-uniform contact of a brake shoe Pierce or replace
Buckling or non-uniform wear of a brake disk, drum or slip Repair or replace
Violation of functioning of automatic adjustment of gaps of brake shoes Adjust
Weakening of bolts of fastening of a brake disk Tighten bolts
Malfunction of the brake cylinder Repair or replace
Wrong adjustment of corners of installation of wheels Adjust
Different pressure of air in tires Adjust
Prikhvatyvaniye of brakes Lack of a free wheeling of a pedal of a brake Adjust
The gap of a rod of the cylinder is incorrectly adjusted Adjust
The exhaust outlet of the main brake cylinder is littered Clear
The returnable spring is weakened Replace
The brake cylinder does not come back to a starting position Clear or replace
Malfunction of an epiploon of the piston of the cylinder of a disk brake Replace
Excessive wear of a surface of a disk Replace
The increased COURSE of a pedal Wrong adjustment of a pedal Adjust
Worn-out block or slip Replace
The increased noise or vibration when braking Worn-out block or slip Replace
The jarred-on block or slip Pierce or replace
The brake does not come back to a starting position Repair
Alien substances or scratches on a disk or drum surface Clear
Weak fastening of a brake disk or support Tighten bolts
The damaged surface of a brake disk or drum Replace
Bad contact of a brake shoe or slip Repair or replace
Insufficient greasing of rubbing parts Grease
The wheel "conducts" aside Prikhvat of a brake Repair
Malfunction of steering system Repair
The damaged or debalanced wheels Repair
The wrong pressure in tires Repair
Malfunction of suspension brackets Repair