Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. АКП G4A–EL
   10.1. Specifications
   10.2. Search and determination of malfunctions
   10.3. Table of fast diagnostics
   10.4. Self-diagnostics system
   10.5. Codes of malfunctions
   10.6. Diagnostic socket
   10.7. Postrepair operation
   10.8. Testing of collaboration of an automatic transmission and the engine on the motionless car
   10.9. Testing for delay time
   10.10. Testing of pressure of transmission liquid
   10.11. Testing for the pressure reduced by the valve
   10.12. Check of level and a liquid condition in an automatic transmission
   10.13. Leakages of liquid from an automatic transmission
   10.14. Cable of a drive of a butterfly valve
   10.15. Mode switch
   10.16. Switch of stoplights
   10.17. Sensor of temperature of transmission ATF liquid
   10.18. Check of resistance of the generator of impulses
   10.19. Electromagnetic valves
   10.20. Removal of an automatic transmission
   10.21. General recommendations about transmission dismantling
   10.22. Dismantling of an automatic transmission
   10.23. Check and adjustment of preliminary loading of bearings
   10.24. Assembly of an automatic transmission
   10.25. Installation of an automatic transmission
   10.26. Oil radiator
   10.27. Driving disk
   10.28. Check of work and adjustment of position of the lever of the selector
   10.29. Selector lever
   10.30. Repair of the lever of the selector
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits






10.12. Check of level and a liquid condition in an automatic transmission

GENERAL INFORMATION

Prevention

The car should stand on an equal horizontal surface.



PERFORMANCE ORDER
1. Tighten the parking brake and block wheels an emphasis for an exception of a kacheniye of the car.
2. Start up the engine before transmission warming up to temperature 60–70°C.
3. At the working engine slowly move the selector lever from a position of "R" to situation "L", thus press a brake pedal.
4. Move the selector lever to "R".
5. Check level of liquid which should be between HOT labels (65°C). If necessary add necessary amount of demanded liquid.

ATF type: DEXRON–II or M–II

Prevention

Use measurements on COOL scale (20°C) only as rough value.



Check

Prevention

Carefully check a liquid condition in an automatic transmission and define, whether really the automatic transmission should be dismantled.

If liquid in an automatic transmission is polluted and burned slightly, it indicates the burned plates or brake tapes.


PERFORMANCE ORDER
1. Check color of liquid in an automatic transmission.
2. Check liquid in an automatic transmission on presence of unusual smells. For definition of change of color and a liquid smell, compare it to fresh liquid.