Kia Clarus/Credos

1995-2001 of release

Repair and car operation


KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. АКП G4A–EL
   10.1. Specifications
   10.2. Search and determination of malfunctions
   10.3. Table of fast diagnostics
   10.4. Self-diagnostics system
   10.5. Codes of malfunctions
   10.6. Diagnostic socket
   10.7. Postrepair operation
   10.8. Testing of collaboration of an automatic transmission and the engine on the motionless car
   10.9. Testing for delay time
   10.10. Testing of pressure of transmission liquid
   10.11. Testing for the pressure reduced by the valve
   10.12. Check of level and a liquid condition in an automatic transmission
   10.13. Leakages of liquid from an automatic transmission
   10.14. Cable of a drive of a butterfly valve
   10.15. Mode switch
   10.16. Switch of stoplights
   10.17. Sensor of temperature of transmission ATF liquid
   10.18. Check of resistance of the generator of impulses
   10.19. Electromagnetic valves
   10.20. Removal of an automatic transmission
   10.21. General recommendations about transmission dismantling
   10.22. Dismantling of an automatic transmission
   10.23. Check and adjustment of preliminary loading of bearings
   10.24. Assembly of an automatic transmission
   10.25. Installation of an automatic transmission
   10.26. Oil radiator
   10.27. Driving disk
   10.28. Check of work and adjustment of position of the lever of the selector
   10.29. Selector lever
   10.30. Repair of the lever of the selector
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits



http://likewomen.ru/like_state/modeli-nedorogih-kostyumov-jenschinam/

10.28. Check of work and adjustment of position of the lever of the selector

 Check

PERFORMANCE ORDER
1. Be convinced that the lever of the selector can be moved, as is shown in drawing.
2. Check that when moving the lever of the selector from a position P in a position L, in each situation there is a click.
3. Check that positions of the lever of the selector correspond to indication of the lever of the selector.
4. At discrepancy of characteristics adjust the display panel.
5. Check that positions of the lever of the selector correspond to indication in a combination of devices.
6. At discrepancy of characteristics adjust the switch.
7. Be convinced that the car functions in each chosen situation.

Adjustment
PERFORMANCE ORDER
1. Move the selector lever to a position P.
2. Weaken bolts of fastening of a cable of the lever of the selector.
3. Pull a selector cable to its lever.
4. Press the selector lever against a position P and hold him in this situation.
5. Tighten bolts of fastening of a cable of the lever of the selector.

Inhaling moment: 7,9–10,7 N • m


Display panel
PERFORMANCE ORDER
1. Move the selector lever to a position P.
2. Weaken screws of fastening of the display panel.
3. Combine adjusting screws in the toddler with openings in the display panel. Establish a suitable thick wire for support of the toddler.
4. Temporarily establish the display panel on an arm of the lever of the selector.
5. Tighten screws of fastening of the display panel in the sequence shown in drawing.

Inhaling moment: 2,0–2,9 N • m

6. Remove a wire.
7. Make sure that positions of the lever of the selector correspond to the display panel of the lever of the selector in each situation.