Kia Clarus/Credos

1995-2001 of release

Repair and car operation



KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. АКП G4A–EL
   10.1. Specifications
   10.2. Search and determination of malfunctions
   10.3. Table of fast diagnostics
   10.4. Self-diagnostics system
   10.5. Codes of malfunctions
   10.6. Diagnostic socket
   10.7. Postrepair operation
   10.8. Testing of collaboration of an automatic transmission and the engine on the motionless car
   10.9. Testing for delay time
   10.10. Testing of pressure of transmission liquid
   10.11. Testing for the pressure reduced by the valve
   10.12. Check of level and a liquid condition in an automatic transmission
   10.13. Leakages of liquid from an automatic transmission
   10.14. Cable of a drive of a butterfly valve
   10.15. Mode switch
   10.16. Switch of stoplights
   10.17. Sensor of temperature of transmission ATF liquid
   10.18. Check of resistance of the generator of impulses
   10.19. Electromagnetic valves
   10.20. Removal of an automatic transmission
   10.21. General recommendations about transmission dismantling
   10.22. Dismantling of an automatic transmission
   10.23. Check and adjustment of preliminary loading of bearings
   10.24. Assembly of an automatic transmission
   10.25. Installation of an automatic transmission
   10.26. Oil radiator
   10.27. Driving disk
   10.28. Check of work and adjustment of position of the lever of the selector
   10.29. Selector lever
   10.30. Repair of the lever of the selector
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits




10.15. Mode switch

Check

PERFORMANCE ORDER
1. Press the mode switch at the switched-on switch of ignition and check, whether the PWR symbol on the mode indicator lights up.
2. At misoperation check tension on contacts of the socket of the switch of a mode.

Tension check

PERFORMANCE ORDER
1. Remove the back console.
2. Include ignition.
3. Check compliance of tension on A (LG) plugs and C (W) to demanded values.
Mode switch
Contiguity of a chain
It is pressed
В*
It is released
Less than 1,5 In

В*: Tension of the storage battery
4. If tension on contacts differs from demanded values, check contiguity of a chain.

Check of contiguity of a chain

PERFORMANCE ORDER
1. Disconnect the socket from the mode switch.
2. Check contiguity of a chain between contacts of A (LG) and C (W).
Mode switch
Contiguity of a chain
It is pressed
0
It is released
X