KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. Mechanical transmission
9.1. Specifications
9.2. Check of level of oil
9.3. Oil replacement
9.4. Transmission removal
9.5. Transmission installation
9.6. General recommendations about transmission dismantling
9.7. Dismantling, check of a fifth / reverse gear and case
9.8. Dismantling of knots of a case of coupling and transmission case
9.9. Replacement of oil consolidation of differential on the car
9.10. Dismantling of primary shaft of a transmission
9.11. Dismantling of a secondary shaft of a transmission
9.12. Check of details of primary and secondary shaft
9.13. General recommendations about assembly
9.14. Assembly of a secondary shaft
9.15. Assembly of primary shaft
9.16. Assembly, check of a fifth / reverse gear and case
9.17. Choice of adjusting laying
9.18. Preliminary tightness of the bearing of differential
9.19. Adjustment of a preliminary tightness of the bearing
9.20. Remarks on transmission assembly
9.21. Differential
9.22. Gear shifting mechanism
9.23. Search and elimination of malfunctions
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits
|
1–cross-piece;
2–exhaust pipe;
3–handle of the lever of gear shifting;
4–back ashtray;
5–back console;
6–forward console;
7–nut;
8–bolt;
9–nut;
10-bolt;
11-plug;
12-draft of management of gear shifting;
13-nut;
14-washer;
15-tube; |
16-plug;
17-washer;
18-plug;
19-nuts;
20-washers;
21-insulator;
22-bolt;
23-spring;
24-saddle of the spherical hinge (top);
25-gear shifting lever;
26-cover;
27-holder;
28-saddle of the spherical hinge (bottom);
29-draft of gear shifting. |
Repair
| PERFORMANCE ORDER |
| 1. Dismantling carry out in the sequence designated by figures in drawing. |
| 2. Check a condition of all details and, if necessary, replace them. |
| 3. Assembly is carried out to sequences, return to removal. |
| 4. Removal and installation of separate details it is provided below. |
|
Installation of draft of gear shifting
| PERFORMANCE ORDER |
| 1. Establish draft of gear shifting for the car bottom, then on a transmission. Tighten nuts of fastening of draft of a choice of transfers to a transmission. Inhaling moment: 38–51 N • m
|
|
2. Tighten nuts of an arm of the lever of gear shifting the demanded moment. Inhaling moment: 9,8–14,7 N • m
|
|
Spring installation
| PERFORMANCE ORDER |
|
|
|
Be convinced that the spring end with a hook is established properly in arm deepening, as is shown in drawing. |
|
|
|