Kia Clarus/Credos

1995-2001 of release

Repair and car operation

KIA Klarus
1.1. Periodicity of maintenance
+ 2. FE DOHC engines and Т8 DOHC
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. Mechanical transmission
   9.1. Specifications
   9.2. Check of level of oil
   9.3. Oil replacement
   9.4. Transmission removal
   9.5. Transmission installation
   9.6. General recommendations about transmission dismantling
   9.7. Dismantling, check of a fifth / reverse gear and case
   9.8. Dismantling of knots of a case of coupling and transmission case
   9.9. Replacement of oil consolidation of differential on the car
   9.10. Dismantling of primary shaft of a transmission
   9.11. Dismantling of a secondary shaft of a transmission
   9.12. Check of details of primary and secondary shaft
   9.13. General recommendations about assembly
   9.14. Assembly of a secondary shaft
   9.15. Assembly of primary shaft
   9.16. Assembly, check of a fifth / reverse gear and case
   9.17. Choice of adjusting laying
   9.18. Preliminary tightness of the bearing of differential
   9.19. Adjustment of a preliminary tightness of the bearing
   9.20. Remarks on transmission assembly
   9.21. Differential
   9.22. Gear shifting mechanism
   9.23. Search and elimination of malfunctions
+ 10. АКП G4A–EL
+ 11. АКП 50–40 LE
+ 12. Axes and power shafts
+ 13. Steering
+ 14. Wheels and tires
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment
+ 19. Brake system
+ 20. Electric circuits

9.3. Oil replacement

1. Lift the car and fix it in horizontal situation.
2. Turn out a stopper the oil plum, located in a transmission end face.
3. Merge oil in the suitable container.
4. Establish on a stopper a new washer and screw a stopper oil plum into place.

Inhaling moment: 40–58 N • m

5. Turn out a stopper of check of level of oil and remove a washer. Fill in demanded amount of necessary oil through an opening of a control stopper of level of oil while its level will not reach bottom edge of a carving opening of a stopper of check of level of oil.

Recommended oil
Grade: API Service GL–4
Viscosity: SAE 80W–90A
Refueling volume: 2,7 l
6. Establish a new washer and wrap a stopper of check of level of oil.

Inhaling moment: 40–58 N • m
7. Start up the engine and leave it to work before oil warming up in a transmission. Check absence of leakages of oil from a transmission.